Save 15% on 2 packs BUY2 · 20% on 3+ BUY3

Skip to content
ARDMS SPI Exam Practice Questions, practice question pack
Passed the ENCOR 350-401. This is a hard exam and having seen real questions beforehand made walking in much less stressful. Passed on first attempt.
Luis Flynn350-401
Pass, or your money backFail the exam after using this pack and we refund it, or swap it for any other pack. How the guarantee works

ARDMS SPI Exam Practice Questions

Every question comes with the correct answer and a clear explanation.

  • 99% pass rate
  • 107 questions
  • 2 PDFs

US$39Pay in your own currency at checkout

Delivered to your email within 24 hours.

  • Free updates for lifeEvery new version of this pack, emailed to you free.
  • Secure checkoutPayPal or card. Pay once, no subscription.
  • Questions-only copyA second PDF without the answers, for timed practice runs.

What’s insideFAQ

Try before you buy

Five of the 107 questions in this pack

Question 1

Which control should a sonographer use to change contrast resolution?

Not this one. Try another answer.

Why A is wrong

Reject only removes low-level echoes below a chosen threshold, it does not set the overall gray scale span.

Not this one. Try another answer.

Why B is wrong

Output power changes how much sound enters the patient, which affects brightness and bioeffects, not the gray scale mapping.

Not this one. Try another answer.

Why C is wrong

Gain amplifies all received echoes equally and changes overall brightness, not contrast resolution.

Right, D is the answer.

Why D is right

Dynamic range sets the span of echo amplitudes shown as shades of gray. A wider range gives more gray levels and softer contrast, a narrower one gives a starker black and white image.

Question 2

What is a potential negative consequence of using a high wall filter?

Right, A is the answer.

Why A is right

A wall filter removes low-frequency Doppler shifts from slow-moving tissue and vessel walls. Set too high, it also removes real low-velocity blood flow signals that you want to see.

Not this one. Try another answer.

Why B is wrong

Aliasing depends on pulse repetition frequency and the Doppler shift, not on the wall filter.

Not this one. Try another answer.

Why C is wrong

Penetration is set by transducer frequency and output, not by a Doppler filter.

Not this one. Try another answer.

Why D is wrong

A higher wall filter removes low-frequency clutter, so it reduces that kind of noise rather than adding it.

Question 3

Which unfocused transducer will have the greatest divergence?

Right, A is the answer.

Why A is right

Beam divergence in the far field is greater with a smaller aperture and a lower frequency. The 4 mm, 4 MHz transducer combines both, so its beam spreads the most.

Not this one. Try another answer.

Why B is wrong

The higher frequency narrows the far field beam compared with 4 MHz at the same aperture.

Not this one. Try another answer.

Why C is wrong

The larger aperture reduces divergence compared with the 4 mm transducer at the same frequency.

Not this one. Try another answer.

Why D is wrong

A larger aperture and a higher frequency both reduce divergence, making this the least divergent beam.

Question 4

During 3-D volume acquisition, the quality of the images is most dependent upon which factor?

Right, A is the answer.

Why A is right

A 3-D volume is built from many 2-D slices, so more slices acquired means more data to build the volume from. This is the main driver of volume image quality.

Not this one. Try another answer.

Why B is wrong

Power output affects signal strength and bioeffects, but it does not set how much spatial data the volume holds.

Not this one. Try another answer.

Why C is wrong

The rendering method changes how the volume is displayed, not the quality of the acquired data.

Not this one. Try another answer.

Why D is wrong

Compression speed after acquisition does not change the acquired image detail.

Question 5

Which feature is a characteristic of continuous wave Doppler?

Not this one. Try another answer.

Why A is wrong

Continuous wave has range ambiguity, because it samples along the whole beam. Range specificity belongs to pulsed wave.

Not this one. Try another answer.

Why B is wrong

Aliasing is a pulsed wave problem. Continuous wave can measure very high velocities without aliasing.

Not this one. Try another answer.

Why C is wrong

Continuous output deposits more energy, so the thermal index is not characteristically low.

Right, D is the answer.

Why D is right

Continuous wave Doppler sends and listens at the same time, so it needs one crystal that always transmits and another that always receives.

How much of the ARDMS SPI bank is free?

107 questions in the bank

  • Free sample: 41 questions41 real questions, every answer explained, in one PDF.Download PDF
  • Full pack, US$39All 107 questions. Plus the questions-only PDF, free updates for life, refund if you fail.Get the full pack

SPI exam questions with answers: all 107 for ARDMS SPI.

  • 107 questions mapped to the SPI content outline v24.1
  • Answers and explanations for every question, including the wrong options
  • A questions-only PDF for timed practice runs
  • Email delivery: sent to your email within 24 hours
  • Free updates for life
  • Pass or your money back

The SPI exam costs US$275. This pack is US$39, paid once.

SPI exam questions: the short answers

How many questions are on the SPI exam?
Inteleos says the SPI exam covers approximately 110 questions over two hours.

What score do I need to pass?
Scores run on a scale of 300 to 700, and 555 or better passes. It is not percentage or curve based.

How much does the SPI exam cost?
Inteleos lists the SPI exam fee as US$275.

What makes the SPI exam hard

Doppler is the biggest domain. Applying Doppler concepts carries 34% of the SPI content outline, ahead of optimizing sonographic images at 26%. Expect questions on wall filters, aliasing, continuous wave versus pulsed wave and how instrument settings change the display.

The rest of the outline covers performing ultrasound examinations (23%), clinical safety and quality assurance (10%) and managing transducers (7%). Transducer questions often mix aperture, frequency and beam shape, so practise the relationships rather than memorising single facts.

About the exam

The SPI exam from Inteleos (ARDMS) tests the physics and instrumentation behind diagnostic ultrasound. It is taken by sonographers and students working toward ARDMS credentials. It is a scored exam of about 110 questions in two hours.

Before you buy

What you get for US$39

  • All 107 questions, each with the correct answer and why the other options are wrong
  • 2 PDFs: the full pack, plus a questions-only copy for timed practice
  • Delivered to your email within 24 hours
  • Updated once a month, with free updates for life, emailed to the address you used at checkout

How a question works

Example: tap an answer, it is marked right or wrong, and the reason for that answer appears under the options.

What do I get?

Every pack comes as 2 PDFs: one with every answer explained, and a questions-only copy for timed practice. Both are delivered to your email within 24 hours, and every pack includes free updates for life.

How often are the questions updated?

Question sets are updated once a month.

Will I receive updates after purchasing?

Yes. All PDF purchases include lifetime updates. Updated versions are emailed automatically to the email address used during checkout.

What if an answer looks wrong?

We correct mistakes as we find them, and the monthly update sends those fixes to you. No question bank this size is ever completely flawless, so if something still looks off to you, check it against the vendor's own documentation and send it to support@certstash.com. We reply to every message, and the fix ships in the next update, free, for life.

Are your materials enough to pass the exam?

Most candidates use them as their main practice source. If you study with them and still fail, we refund you in full.

What happens if I fail my exam?

You get your money back. Sit the exam 7 to 30 days after buying, then email support@certstash.com within 7 days of the exam with your order number and a copy of your official score report showing the fail. Full terms are in the refund policy.

Do you have discount codes?

Yes, when you buy more than one exam pack. For 2 packs, use code BUY2 for 15% off. For 3 or more packs, use code BUY3 for 20% off. Enter the code in the discount box at checkout.

What payment methods do you accept?

Visa, Mastercard and other cards, Apple Pay, Google Pay and PayPal.

Do you offer shipping?

No. All products are digital downloads. There is no physical shipping.

I did not receive my order after payment.

Contact support@certstash.com with your order number and payment confirmation details.