2 packs: 15% off with code BUY2. 3 or more: 20% off with code BUY3.

FORTINET · NSE4_FGT_AD-7.6

Fortinet NSE4_FGT_AD-7.6 Exam Practice Questions

99% pass rateUpdated 1 Nov 202694 questions2 PDFs, instant download
5.02 reviews
(2 customer reviews)

US$39

Every question with the correct answer and why the other options are wrong.

Download the free sample

Card, Apple Pay, Google Pay or PayPal. Download links are on your order page and in your email the moment you pay.

99% pass rate. Pass or your money back.Fail the exam after using this pack and we refund it, or swap it for any other pack. How the guarantee works
I took the NSE4_FGT_AD-7.6 exam last week. It's still valid. I passed smoothly.
Stanley FahrlanderNSE4_FGT_AD-7.6
Category:
TRY BEFORE YOU BUY

Three of the 94 questions in this pack

Question 1

Which three statements about SD-WAN performance SLAs are true? (Choose three.)

  1. They can be measured actively or passively.
  2. They are applied in a SD-WAN rule lowest cost strategy.
  3. They monitor the state of the FortiGate device.
  4. All the SLA targets can be configured.
  5. They rely on session loss and jitter.
Show answer and explanation

Correct answer: A, B, D. They can be measured actively or passively; They are applied in a SD-WAN rule lowest cost strategy; All the SLA targets can be configured.

SD-WAN performance SLAs can be measured both actively (FortiGate sends probes like ping, HTTP, DNS, or TCP to SLA targets) and passively (FortiGate measures real user traffic). They are applied in SD-WAN rules including the lowest cost strategy, where SLAs determine which links are eligible before cost is considered. All SLA target thresholds can be configured, including latency, jitter, and packet loss. Option C is incorrect because SLAs monitor link performance, not the state of the FortiGate device itself. Option E is incorrect because SLAs measure latency, jitter, and packet loss, not session loss and jitter.

Why the other options are wrong

  • C. SLAs monitor the performance of network links and connections, not the operational state of the FortiGate device.
  • E. SLAs measure latency, jitter, and packet loss; session loss is not a standard SLA metric.

Question 2

FortiGate is operating in NAT mode and has two physical interfaces connected to the LAN and DMZ networks respectively.

Which two statements about the requirements of connected physical interfaces on FortiGate are true? (Choose two.)

  1. Both interfaces must have directly connected routes on the routing table.
  2. Both interfaces must have IP addresses assigned.
  3. Both interfaces must have DHCP enabled and interfaces set to LAN and DMZ roles assigned.
  4. Both interfaces must have the interface role assigned.
Show answer and explanation

Correct answer: A, B. Both interfaces must have directly connected routes on the routing table; Both interfaces must have IP addresses assigned.

For physical interfaces connected to networks in NAT mode, both interfaces must have IP addresses assigned to enable communication and routing. Both interfaces must have directly connected routes in the routing table so FortiGate can forward traffic between the networks. DHCP enablement is not mandatory, static IP addresses are acceptable. Interface roles (LAN/DMZ designation) are optional for basic NAT functionality, though they may be used for organization or advanced features. The core requirement is IP address assignment and connected routes for the interfaces to function.

Why the other options are wrong

  • C. DHCP is not required; interfaces can use static IP addresses. Interface roles are optional for NAT mode operation.
  • D. Interface roles are not mandatory for interfaces to function in NAT mode, though they may be assigned for management purposes.

Question 3

A network administrator has enabled full SSL inspection and web filtering on FortiGate.

When visiting any HTTPS websites, the browser reports certificate warning errors.

When visiting HTTP websites, the browser does not report errors.

What is the reason for the certificate warning errors?

  1. The matching firewall policy is set to proxy inspection mode.
  2. The option invalid SSL certificates is set to allow on the SSL/SSH inspection profile.
  3. The certificate used by FortiGate for SSL inspection does not contain the required certificate extensions.
  4. The browser does not trust the certificate used by FortiGate for SSL inspection.
Show answer and explanation

Correct answer: D. The browser does not trust the certificate used by FortiGate for SSL inspection.

When FortiGate performs SSL inspection, it replaces the original server certificate with its own self-signed certificate to decrypt and inspect HTTPS traffic. The browser reports certificate warning errors because it does not trust the self-signed certificate that FortiGate presents, the certificate is not issued by a trusted Certificate Authority. This is the expected behavior of SSL inspection. The certificate warnings do not occur for HTTP because HTTP traffic is not encrypted and does not involve certificate validation.

Why the other options are wrong

  • A. Proxy inspection mode is the correct mode for SSL inspection and would not cause unexpected certificate errors.
  • B. The setting to allow invalid SSL certificates would reduce errors, not cause them.
  • C. Certificate extensions are not the cause of browser trust warnings when the certificate issuer itself is untrusted.

See all 20 free questions Get the full pack, US$39

REVIEWS

2 reviews for Fortinet NSE4_FGT_AD-7.6 Exam Practice Questions

  1. Stanley Fahrlander –

    I took the NSE4_FGT_AD-7.6 exam last week. It's still valid. I passed smoothly.

  2. Hogan –

    I used NSE4_FGT_AD-7.6 real exam questions Fortinet NSE 4

Only logged in customers who have purchased this product may leave a review.

How much of the Fortinet NSE4_FGT_AD-7.6 bank is free?

94 questions in the bank

Each step includes the one before, so buying only adds new questions.

  • You are here10questionsFree sampleThree on this page, all ten as a PDF.Download the sample
  • 2021% of the bankPractice pageFree on the site, every answer explained.Go to the practice page
  • 4245% of the bankHalf PackFree by email, as one PDF, every answer explained.Get the Half Pack
  • 94100%, the whole bankFull pack, US$39Plus the questions-only PDF, monthly updates, refund if you fail.Get the full pack
ABOUT THIS PACK

What’s in the Fortinet NSE4_FGT_AD-7.6 pack

  • 94 questions across all five NSE4_FGT_AD-7.6 domains
  • Answers and explanations for every question, including the wrong options
  • A questions-only PDF for timed practice runs
  • Instant delivery by email the moment you check out
  • Free monthly updates for as long as the exam is live
  • Pass or your money back

A failed NSE 4 attempt costs another US$200, plus the weeks it takes to get ready again. This pack is US$39, paid once, and refunded if you fail anyway.

What makes the NSE 4 hard

If searching for FCP_FGT_AD-7.6, it is the same exam. Fortinet retired the FCF, FCA, FCP, FCSS and FCX names on 15 July 2026 and put the program back on visible NSE 1 to 8 levels. The FortiGate Administrator exam is now NSE 4, FortiOS 7.6 Administrator, registered as NSE4_FGT_AD-7.6, with the same content and blueprint under a new label.

It pays to watch the version, not just the name. Fortinet has NSE 4, FortiOS 8.0 Administrator scheduled for release in early October 2026, and Fortinet's stated practice is that the previous version stays bookable for roughly four months after a new one lands, so anyone studying 7.6 should book it rather than drift into the changeover.

NSE 4 is the entry point to the whole ladder: the FortiManager and FortiAnalyzer credentials sit above it, so everything downstream stalls until this one is done.

The exam is not a definition quiz. It leans on configuration extracts, CLI output and troubleshooting scenarios, and content inspection alone is up to 30% of it. This pack has 94 practice questions across all five domains, with every answer explained.

About the exam

NSE 4, FortiOS 7.6 Administrator (NSE4_FGT_AD-7.6) validates the ability to deploy, configure, operate and troubleshoot FortiGate devices in a production network. It is the NSE 4 level of the Fortinet NSE certification program and the standard starting point for the Secure Networking track. It covers FortiOS 7.6.0.

Questions before you buy

How quickly do I receive it?

Straight away. The full PDF and a questions-only copy are emailed to you the moment your payment goes through, and the same links are on your order page.

Are updates included?

Yes. The pack is updated every month for as long as the exam is live, and updates are free for everyone who has bought it.

What if I fail the exam?

We refund the pack, or swap it for any other pack if you would rather keep studying. Sit the exam 7 to 30 days after buying, then send your official score report within 7 days of the exam date, as set out in the refund policy.

What is your pass rate?

99% of customers who prepare with a CertStash pack pass. If you do not, we refund the pack, or swap it for another pack.

Can I share it with colleagues?

Each purchase is licensed to one person. For a team, school or training organisation, email support@certstash.com for a licence that fits.