2 packs: 15% off with code BUY2. 3 or more: 20% off with code BUY3.

HPE HPE2-T37 Using HPE OneView Exam Practice Questions, practice question pack
HPE · HPE2-T37

HPE HPE2-T37 Using HPE OneView Exam Practice Questions

99% pass rateUpdated 1 Nov 202692 questions2 PDFs by email

US$39

Every question with the correct answer and why the other options are wrong.

Download the free sample

Card, Apple Pay, Google Pay or PayPal. Your PDF is prepared and emailed to you after checkout, usually within a few hours.

99% pass rate. Pass or your money back.Fail the exam after using this pack and we refund it, or swap it for any other pack. How the guarantee works
Category:
TRY BEFORE YOU BUY

Three of the 92 questions in this pack

Question 1

Your customer asks you if it is possible to perform HPE Synergy initial setup remotely.

How should you respond?

  1. Remote HPE Synergy setup is possible if HPE Composer 2 is used and a DHCP server is available in the management network
  2. HPE Synergy can be configured remotely through a secure connection to the FLM if this option was enabled in the factory
  3. HPE Synergy cannot be deployed remotely, as initial setup must be performed using a local console connection
  4. Remote HPE Synergy installation can be done only if an additional set of the services was purchased together with hardware platform
Show answer and explanation

Correct answer: A. Remote HPE Synergy setup is possible if HPE Composer 2 is used and a DHCP server is available in the management network

HPE Synergy initial setup does not always need someone standing at the frame. When the frames use HPE Synergy Composer2 and a DHCP server is available on the management network, the Composer obtains an IPv4 address automatically, and the administrator can reach the HPE Synergy Console over the network to complete hardware setup and initial configuration remotely. Without Composer2 and DHCP, initial setup is performed through a local connection to the frame, such as a laptop on the front panel port or the Composer front panel display connection.

Why the other options are wrong

  • B. There is no factory-enabled option for a secure remote connection to the Frame Link Module that performs initial setup.
  • C. Remote initial setup is supported with Composer2 and DHCP, so a local console is not the only method.
  • D. Remote setup is a built-in capability and does not depend on buying an additional services package.

Question 2

Your customer built a server profile for HPE Synergy Gen10 server and configured boot mode to Legacy BIOS.

Which feature is not available for this Compute Module?

  1. Boot from SAN
  2. Secure boot
  3. Workload profile
  4. BIOS management
Show answer and explanation

Correct answer: B. Secure boot

Secure Boot is a UEFI feature. It verifies the digital signatures of boot loaders and drivers against keys held in UEFI firmware, so it can be enabled only when the server boots in UEFI or UEFI optimized mode. When a server profile sets the boot mode to Legacy BIOS, Secure Boot is unavailable for that Compute Module. Boot from SAN, workload profiles and BIOS settings management all continue to work in Legacy BIOS mode, because none of them depends on the UEFI boot process.

Why the other options are wrong

  • A. Boot from SAN is supported in Legacy BIOS mode as well as in UEFI modes.
  • C. Workload profiles are BIOS settings and remain available regardless of the boot mode.
  • D. HPE OneView manages BIOS settings through the server profile in any boot mode.

Question 3

How can your customer implement HPE OneView so that it can be used to manage an HPE ProLiant server and HPE BladeSystem?

  1. As a virtual appliance running on the supported hypervisor
  2. As an application running on the server with CentOS Linux system
  3. As an application running on the server with Windows system
  4. As a physical appliance based on HPE ProLiant DL360 Gen10
Show answer and explanation

Correct answer: A. As a virtual appliance running on the supported hypervisor

For HPE ProLiant rack servers and HPE BladeSystem c-Class enclosures, HPE OneView is delivered as a virtual appliance. The administrator deploys the appliance image on a supported hypervisor, such as VMware ESXi or Microsoft Hyper-V, powers it on and completes initial setup through the browser interface. The appliance is a self-contained system with its own operating system and database, so it is not installed as an application on a general-purpose server. For HPE Synergy, the same software runs on the HPE Synergy Composer hardware module instead.

Why the other options are wrong

  • B. HPE OneView is not installed as an application on a CentOS Linux server.
  • C. HPE OneView is not installed as an application on a Windows server.
  • D. HPE OneView is not sold as a physical appliance based on a ProLiant DL360 Gen10.

See all 11 free questions Get the full pack, US$39

How much of the HPE HPE2-T37 Using HPE OneView bank is free?

92 questions in the bank

Each step includes the one before, so buying only adds new questions.

  • You are here10questionsFree sampleThree on this page, all ten as a PDF.Download the sample
  • 1112% of the bankPractice pageFree on the site, every answer explained.Go to the practice page
  • 4347% of the bankHalf PackFree by email, as one PDF, every answer explained.Get the Half Pack
  • 92100%, the whole bankFull pack, US$39Plus the questions-only PDF, monthly updates, refund if you fail.Get the full pack
ABOUT THIS PACK

What’s in the HPE HPE2-T37 Using HPE OneView pack

  • 92 questions mapped to the HPE2-T37 exam objectives
  • Answers and explanations for every question, including the wrong options
  • A questions-only PDF for timed practice runs
  • Delivered by email shortly after checkout
  • Free monthly updates
  • Pass or your money back

Another HPE2-T37 attempt means paying the fee again, plus weeks of restudying. HPE prices its exams by country, and Pearson VUE shows your fee when you book. This pack is US$39, paid once, and refunded if you fail.

What makes the HPE2-T37 hard

HPE2-T37 is short: 40 questions in one hour with a 70% pass mark. That is 90 seconds a question, and the format mixes matching, drag and drop and point and click items with multiple choice.

Installing and configuring HPE OneView is the biggest objective at 27%, and provisioning hybrid IT infrastructure follows at 24%. Architecture and design add 15%, product positioning 13%, management and reporting 11%, and troubleshooting 8%. Server profiles, templates and firmware updates are the configuration topics to know cold.

About the exam

HPE2-T37 (Using HPE OneView) earns the HPE Product Certified - OneView certification. It covers HPE OneView elements and positioning, designing a data center management solution, installing and configuring OneView, and provisioning, managing, monitoring and troubleshooting hybrid IT infrastructure with it. Web based exam, 40 questions, 1 hour, passing score 70%.

Questions before you buy

How quickly do I receive it?

Your PDF is prepared and sent to your email address after checkout, and you get a confirmation as soon as it is on its way.

Are updates included?

Yes. The pack is updated every month for as long as the exam is live, and updates are free for everyone who has bought it.

What if I fail the exam?

We refund the pack, or swap it for any other pack if you would rather keep studying. Sit the exam 7 to 30 days after buying, then send your official score report within 7 days of the exam date, as set out in the refund policy.

What is your pass rate?

99% of customers who prepare with a CertStash pack pass. If you do not, we refund the pack, or swap it for another pack.

Can I share it with colleagues?

Each purchase is licensed to one person. For a team, school or training organisation, email support@certstash.com for a licence that fits.

Related products