Free VMware 2V0-11.25 practice questions

10 free VMware 2V0-11.25 practice questions with the correct answer and a full explanation for each, taken from the CertStash pack of 76 questions. Work through them, then open each answer to check your reasoning.

Get all 76 questions (US$39) · Download these 10 as a PDF

Question 1

What is a symptom of an issue with vSphere HA?

  1. Snapshots cannot be created or consolidated.
  2. VMs are not restarted after a host failure.
  3. VMs are not being migrated using vMotion.
  4. Hosts frequently disconnect from vCenter Server.
Show answer and explanation

Correct answer: B. VMs are not restarted after a host failure.

vSphere HA is designed to automatically restart virtual machines when a host fails. If VMs are not being restarted after a host failure, this is a direct symptom that HA is not functioning properly. Snapshot issues, vMotion problems, and host disconnections are symptoms of other vSphere components or infrastructure problems, not HA specifically.

Why the other options are wrong

  • A. Snapshot creation and consolidation issues relate to storage or VM problems, not HA.
  • C. vMotion migration failures indicate vMotion configuration problems, not HA issues.
  • D. Host disconnections from vCenter relate to network or connectivity problems, not HA.

Question 2

Which prerequisite task must be completed before deploying VMware Cloud Foundation (VCF) using VMware Cloud Builder?

  1. Ensure that all ESXi hosts are connected to a single vCenter Server.
  2. Verify network configurations and DNS settings for all components.
  3. Verify configurations on Virtual Distributed Switch on the ESXi hosts that will be used for the deployment.
  4. Ensure HCX is configured for workload migration.
Show answer and explanation

Correct answer: B. Verify network configurations and DNS settings for all components.

components. Before deploying VMware Cloud Foundation using Cloud Builder, verifying network configurations and DNS settings is a critical prerequisite task. Proper DNS resolution and network connectivity are essential for all VCF components to communicate and function correctly. This ensures that the deployment process can proceed without naming or connectivity issues.

Why the other options are wrong

  • A. ESXi hosts are not initially connected to vCenter during Cloud Builder deployment; vCenter is deployed as part of the process.
  • C. Virtual Distributed Switches are not required before Cloud Builder deployment; networking is typically configured during the deployment process.
  • D. HCX is not a prerequisite for initial VCF deployment; it is an optional component for workload migration configured after deployment.

Question 3

The administrator has been tasked with applying asynchronous software updates to the VMware Cloud Foundation (VCF) instance using the VMware Async Patch CLI Tool.

Which four steps would an administrator take to complete the task? (Choose four.)

  1. Download the bundles from SDDC Manager.
  2. Download the bundles.
  3. Upload the confirmation to SDDC Manager.
  4. Apply the patches directly through the Async Patch CLI Tool.
  5. Enable the bundles.
  6. Apply the patches through the SDDC Manager UI.
  7. Upload the bundles to SDDC Manager.
Show answer and explanation

Correct answer: B, E, F, G

B. Download the bundles. E. Enable the bundles. F. Apply the patches through the SDDC Manager UI. G. Upload the bundles to SDDC Manager. The Async Patch Tool is a staging utility, not an install engine. The administrator uses it to download the async patch bundles from the VMware depot, uploads those bundles to SDDC Manager, and enables them so SDDC Manager will accept and display them. The patch itself is then applied from the SDDC Manager UI through the normal lifecycle management update workflow.

Why the other options are wrong

  • A. The bundles are pulled from the VMware depot by the Async Patch Tool, not from SDDC Manager.
  • C. There is no confirmation upload step in the async patch workflow, the bundles themselves are what get uploaded.
  • D. The Async Patch CLI Tool only downloads, uploads and enables bundles, it does not perform the update.

Question 4

While deploying the first VI workload domain in a VMware Cloud Foundation (VCF) solution, which two steps will always be performed by SDDC Manager? (Choose two.)

  1. Deploy an NSX Edge cluster and configure BGP routing on the T0 Gateway.
  2. Deploy a new NSX Manager instance for the VI workload domain.
  3. Configure vSAN as a principal storage for the VI workload domain.
  4. Deploy and configure a new vCenter Server instance for the VI workload domain.
  5. Connect a new vCenter Server instance to the Application Virtual Network.
Show answer and explanation

Correct answer: B, D

B. Deploy a new NSX Manager instance for the VI workload domain. D. Deploy and configure a new vCenter Server instance for the VI workload domain. When deploying the first VI workload domain, SDDC Manager always deploys a new NSX Manager instance dedicated to that domain and deploys and configures a new vCenter Server instance to manage the domain resources. These two components are mandatory for every workload domain. NSX Edge clusters, vSAN configuration, and virtual network connections are optional or configured differently depending on the deployment design.

Why the other options are wrong

  • A. NSX Edge clusters and BGP routing are optional design decisions, not always performed.
  • C. vSAN configuration is optional; other storage options like external arrays may be used.
  • E. vCenter connection to Application Virtual Network is optional and depends on the design.

Question 5

What is the primary benefit of using HCX Replication Assisted vMotion (RAV) for VM migration?

  1. It requires no configuration changes to the VM(s) within the destination environment.
  2. It performs a test migration to ensure compatibility.
  3. It ensures zero downtime to the VM(s).
  4. It provides the fastest migration method by powering off the VM(s) before initiating the migration.
Show answer and explanation

Correct answer: C. It ensures zero downtime to the VM(s).

Replication Assisted vMotion combines bulk replication with vMotion, so the bulk of the data is seeded to the destination in advance and the final switchover is a live vMotion. Because the cutover uses vMotion, the VM stays powered on and the guest and its sessions are preserved with zero downtime. This lets large batches of VMs be scheduled and migrated at scale without an outage window.

Why the other options are wrong

  • A. RAV migrations still require the administrator to select destination compute, storage and network placement, so this is not its defining benefit.
  • B. HCX runs validation checks before migrating, but RAV performs a production migration rather than a test migration.
  • D. Powering off a VM describes cold migration, whereas RAV keeps the VM running throughout replication and switchover.

Question 6

An administrator has been tasked with deploying a new VMware Cloud Foundation (VCF) environment and is preparing the physical hosts that will be used for the management domain. The administrator has completed the following tasks for all of the physical hosts:

The required version of ESXi has been installed.

Networking has been configured for the ESXi management interface.

DNS entries have been created for forward and reverse name resolution.

NTP has been configured and the time synchronized with a centralized time source.

VLAN 10 has been presented to the ESXi hosts on the physical network infrastructure for the VCF ESXi management network.

A combination of which two additional tasks must the administrator complete before starting the bringup of the management domain? (Choose two.)

  1. Upload the Cloud Builder appliance OVA file to the new shared NFS datastore.
  2. Create a new vSphere Standard Switch for the VCF ESXi management network on each ESXi host.
  3. Configure a new shared NFS datastore on each ESXi host.
  4. Replace the SSL certificate with either a CA signed or self-signed certificate on each ESXi host.
  5. Configure VLAN 10 on the VM network Port Group of the vSphere Standard Switch on each ESXi host.
Show answer and explanation

Correct answer: D, E

D. Replace the SSL certificate with either a CA signed or self-signed certificate on each ESXi host. E. Configure VLAN 10 on the VM network Port Group of the vSphere Standard Switch on each ESXi host. Before starting the management domain bringup, the administrator must configure a vSphere Standard Switch with VLAN 10 on each ESXi host for the VCF ESXi management network, and ensure SSL certificates are in place on each ESXi host. These networking and security configurations are prerequisites that allow the hosts to communicate properly with Cloud Builder and participate in the initial configuration process.

Why the other options are wrong

  • A. The Cloud Builder OVA is uploaded to a datastore after the hosts are prepared, not before, and it doesn't need to be an NFS datastore.
  • B. A vSphere Standard Switch must be created, but this is not a separate task from configuring VLAN 10; it's part of option E.
  • C. A shared NFS datastore is created during the management domain deployment process, not as a prerequisite.

Question 7

How do virtual machine (VM) storage policies in a VMware vSphere environment contribute to optimizing resource utilization, ensuring data availability, and meeting application-specific requirements?

  1. By guaranteeing storage IOPs for a particular virtual machine
  2. By regulating and optimizing storage traffic between virtual machines
  3. By streamlining the process of automating virtual machine backups
  4. B y defining and enforcing storage requirements, such as performance, availability, and redundancy
Show answer and explanation

Correct answer: D. B y defining and enforcing storage requirements, such as performance, availability, and redundancy

such as performance, availability, and redundancy VM storage policies express the storage requirements of a workload, such as performance, availability, redundancy and space efficiency, and vSphere then places and keeps the VM on storage that can satisfy them. Policy based management automates placement and compliance checking, so capacity and capabilities are consumed efficiently and application requirements are met consistently. Non compliant VMs are flagged and can be remediated automatically.

Why the other options are wrong

  • A. Policies can set IOPS limit rules that cap a VM's throughput, but they do not guarantee a level of IOPS, and this is only one narrow rule rather than the purpose of policies.
  • B. Shaping or prioritizing storage traffic between VMs is handled by mechanisms such as Storage I/O Control, not by storage policies.
  • C. Backup automation is a data protection function and is unrelated to storage policy based management.

Question 8

An administrator configures a Local Content Library on vCenter Server A, enables publishing, and creates Subscribed Content Libraries on vCenter Server B and vCenter Server C using the publishing URL. However, the contents of the subscribed libraries on vCenter B and C are not synchronizing with the source library on vCenter A.

Which step should the administrator take to troubleshoot the issue?

  1. Recreate the Subscribed Content Libraries on vCenter B and C with a new publishing URL from vCenter Server A to reset the synchronization configuration.
  2. Verify that network connectivity exists between vCenter Server A and the other two vCenters, and ensure that the required ports for Content Library synchronization are open.
  3. Enable bidirectional synchronization on the Content Library settings to ensure updates are propagated back and forth between vCenter Server A and the subscribed libraries.
  4. Manually export the library content from vCenter Server A and import it into the subscribed libraries on vCenter B and C to initialize synchronization.
Show answer and explanation

Correct answer: B. Verify that network connectivity exists between vCenter Server A and the other two vCenters, and ensure that the required ports for Content Library synchronization are open.

vCenter Server A and the other two vCenters, and ensure that the required ports for Content Library synchronization are open. When subscribed libraries fail to synchronize with a published library, the first troubleshooting step is to verify network connectivity between the vCenter instances and ensure that the required ports for Content Library synchronization are open. Synchronization depends on the source vCenter being reachable from the subscribing vCenters over the network.

Why the other options are wrong

  • A. Recreating subscribed libraries should only be done after verifying that the network issue is not the root cause.
  • C. Bidirectional synchronization is not a feature of Content Libraries; synchronization is unidirectional from publisher to subscriber.
  • D. Manual export and import defeats the purpose of automated synchronization and should not be the first troubleshooting step.

Question 9

An administrator is using VMware Aria Automation to automate the provisioning of virtual machines in their VMware Cloud Foundation (VCF) environment. They notice that the deployment requests are failing frequently.

What step should the administrator take in VMware Aria Operations for Logs to diagnose the cause of the failures?

  1. Check the Audit Logs to see if there are any unauthorized access attempts.
  2. Review the Alert Definitions to ensure alerts for request failures are configured and enabled.
  3. Access the Dashboard page to get an overview of system health and performance metrics.
  4. Use the Interactive Analytics feature to search for error messages related to the requests.
Show answer and explanation

Correct answer: D. Use the Interactive Analytics feature to search for error messages related to the requests.

error messages related to the requests. Interactive Analytics in VMware Aria Operations for Logs is the primary feature designed to search, filter, and analyze log data to identify error messages and troubleshoot issues. This capability allows administrators to investigate deployment request failures by querying logs related to Aria Automation provisioning tasks, making it the most direct diagnostic approach for identifying the root cause of failures.

Why the other options are wrong

  • A. Audit Logs focus on access control and authorization events, not deployment request failures.
  • B. Alert Definitions configure notifications but do not provide diagnostic data to identify the actual cause of failures.
  • C. The Dashboard provides overview metrics but lacks the detailed search and filtering capabilities needed to diagnose specific request failures.

Question 10

Which two steps should an administrator perform to configure the backup of the VMware Cloud Foundation (VCF) SDDC Manager and NSX components to allow them to be recovered in the event of a full site failure? (Choose two.)

  1. Backup the NSX Manager configuration by exporting it to an archive file.
  2. Configure the backup settings in SDDC Manager.
  3. Configure image-based backup for the NSX Manager cluster.
  4. Prepare an external SFTP server to store file-based backups.
  5. Define a scheduled task in vCenter to create a snapshot of the NSX Edge cluster.
Show answer and explanation

Correct answer: B, D

B. Configure the backup settings in SDDC Manager. D. Prepare an external SFTP server to store file-based backups. Configuring backup settings in SDDC Manager (Option B) is the foundational step required to enable backup functionality for VCF components. Preparing an external SFTP server (Option D) provides the necessary storage destination for file-based backups of SDDC Manager and NSX components, ensuring backups can be stored securely off-site for disaster recovery purposes.

Why the other options are wrong

  • A. Exporting NSX configuration to an archive is not the same as configuring proper backup and recovery mechanisms required for full site failure scenarios.
  • C. Image-based backup for NSX Manager is not the standard approach; file-based backups through SDDC Manager are the recommended method.
  • E. Creating snapshots of NSX Edge clusters through vCenter does not constitute a proper backup strategy for SDDC Manager and NSX recovery.

That was 10 of 76.

The full VMware 2V0-11.25 pack has all 76 questions, each with the answer, the explanation and why the other options are wrong, plus a questions-only copy for timed runs. US$39, paid once, with free monthly updates and a pass-or-your-money-back guarantee.

Get the full pack