2 packs: 15% off with code BUY2. 3 or more: 20% off with code BUY3.

Free HPE HPE7-A11 Campus Access Professional Architect Practice Questions

5 free HPE HPE7-A11 Campus Access Professional Architect practice questions from the CertStash pack of 94, each with the correct answer and a full explanation. The rule is the same for every exam: ten free on the product page, 5 free here, all 94 in the pack, and each step includes the one before it.

Get all 94 questions (US$39) · Download the first 10 as a PDF

Question 1

What is one use case for designing a 2-tier campus LAN instead of using a 3-tier?

  1. Cross-campus traffic has grown beyond the capacity of a single collapsed core.
  2. The campus has small buildings with only a few wiring closets.
  3. Access aggregation points are not scaling to meet traffic demands.
  4. The network has grown beyond a few building aggregation points.
Show answer and explanation

Correct answer: B. The campus has small buildings with only a few wiring closets.

A two-tier design with a collapsed core is well suited to small buildings with only a few wiring closets and access switches, where the access layer can connect directly to a single core pair without a separate aggregation layer. It also works in larger sites when the fiber from every wiring closet is homed in one location. A three-tier design becomes the better choice as the campus grows, when cross-campus traffic, the number of access aggregation points or the number of building aggregation points outgrow what one collapsed core can handle.

Why the other options are wrong

  • A. Cross-campus traffic beyond the capacity of a single collapsed core is a reason to move to a three-tier design.
  • C. Access aggregation points failing to scale is a reason to add a dedicated aggregation and core layer.
  • D. Growth beyond a few building aggregation points is a driver for a three-tier design.

Question 2

You are responding to a customer’s Request for Proposal (RFP) for a new network infrastructure solution. The RFP outlines the customer’s desired features and technical outcomes but leaves several important design details unspecified.

At this stage in the proposal process, you are tasked with documenting the assumptions you’ve made in order to complete your design and address gaps in the RFP. These assumptions should reflect reasonable expectations that help guide the customer’s understanding of the solution and identify areas where further clarification may be needed.

What is a valid example of assumptions that should be presented to the customer in your RFP response?

  1. The customer's budget has already been approved to fully fund the proposed solution.
  2. The customer's technical staff is fully capable of providing ongoing support for the proposed solution.
  3. All required vendor equipment will be available in time to meet the customer’s requested project schedule.
  4. Adequate space and power are available to rack and commission the proposed equipment.
Show answer and explanation

Correct answer: D. Adequate space and power are available to rack and commission the proposed equipment.

Assumptions in an RFP response record the conditions the design depends on that the RFP did not specify and that the customer must confirm. Stating that adequate rack space and power are available to install and commission the proposed equipment is a reasonable, verifiable assumption about the customer's facilities. If it proves false, the design, cost or schedule must change, so documenting it makes the dependency visible and prompts clarification before the project starts.

Why the other options are wrong

  • A. Budget approval is a commercial matter for the customer, not a technical assumption that shapes the design.
  • B. Assuming the customer's staff can fully support the solution sets an expectation the vendor cannot confirm and may hide a training or support need.
  • C. Equipment availability is a supply commitment the vendor must verify, not an assumption to place on the customer.

Question 3

Which member types require a reboot when doing an In-Service-Software-Upgrade within a VSF stack?

  1. Conductor
  2. Member
  3. all member types
  4. Standby
Show answer and explanation

Correct answer: C. all member types

When a VSF stack is upgraded in service, the new software is loaded on every member and the members are rebooted in a controlled sequence so that the stack keeps forwarding traffic through the remaining members while each one restarts. The conductor, the standby and the ordinary members all run the same image, so every member type must reboot to run the new software. The benefit of the in-service process is that the reboots are staggered, not that any role avoids one.

Why the other options are wrong

  • A. The conductor is not the only role that reboots; every member must run the new image.
  • B. Ordinary members reboot, but so do the conductor and standby.
  • D. The standby reboots along with all other member types, not alone.

Question 4

You are presenting your network design solution to your customer.

What is important to include in your presentation?

  1. protocols that will be used to make your solution work
  2. tangible and intangible returns for the customer
  3. your experience with this kind of project
  4. your rollback plan
Show answer and explanation

Correct answer: B. tangible and intangible returns for the customer

A design presentation should show the customer what they gain from the solution. Describing the tangible returns, such as lower operating costs, higher availability or capacity for growth, and the intangible returns, such as better user experience, stronger security posture and simpler operations, ties the design to the customer's business goals. This is what decision makers use to justify the investment, so it belongs at the center of the presentation.

Why the other options are wrong

  • A. Protocol detail belongs in the technical design documents rather than the customer presentation.
  • C. Your own project experience does not show the customer the value of this specific solution.
  • D. A rollback plan is part of the implementation plan, not a key element of presenting the design.

Question 5

Which is true when it comes to HPE Aruba Networking Central licensing for gateways?

  1. Gateway normal licensing is subdivided into three categories: Foundation, Advanced, and Foundation Base.
  2. WLAN Gateway licenses allow normal SD-Branch features within a campus.
  3. SD-Branch Gateway licenses allow normal WLAN Gateway features within a campus.
  4. SD-WAN Gateway functionality requires security licensing.
Show answer and explanation

Correct answer: C. SD-Branch Gateway licenses allow normal WLAN Gateway features within a campus.

In HPE Aruba Networking Central, gateways are licensed according to the role they perform. SD-Branch gateway licenses cover the SD-Branch feature set, and they also include the standard WLAN gateway functions, so a gateway licensed for SD-Branch can provide normal WLAN gateway services within a campus. The reverse is not true: a WLAN gateway license does not unlock SD-Branch features.

Why the other options are wrong

  • A. Gateway licensing is not described as a split of normal licensing into these three categories.
  • B. WLAN gateway licenses do not include SD-Branch features.
  • D. Security licensing adds security functions; it is not required for SD-WAN gateway functionality.

That was 5 of 94.

The full HPE HPE7-A11 Campus Access Professional Architect pack has all 94 questions, each with the answer, the explanation and why the other options are wrong, plus a questions-only copy for timed runs. US$39, paid once, with free monthly updates and a pass-or-your-money-back guarantee.

Get the full pack

Not ready yet? Get the first 47 free as one PDF by email. Get the Half Pack →